80

SUBSIDIARY SETTINGS (cont.)

Manual Channel Set

Store channels that were not stored during Auto Set Up

( pg. 16), Preset Download ( pg. 18) or Auto Channel Set ( pg. 78).

A Access the Main Menu screen.

Press SET UP MENU.

B Access the Confirmation screen.

Press rt to move the highlight bar (pointer) to “MANUAL CH SET”, then press OK or e. The Confirmation screen appears.

C Select the channel position.

Press rt w e until an open (Example) To store in position 6.

position in which you want to store a channel begins blinking, then press OK. The Manual Channel Set screen appears.

The blueback screen and the programme currently being broadcast by the selected channel appear alternately for 8 seconds each.

D Select the band.

Press rt to change the band between CH (regular) and CC (cable), then press e.

E Input the channel.

Press the number keys to input the channel number you want to store.

●Input “0” before any single number entries.

●To input the registered station name (ID –  pg. 84), press e until “– – – –” (ID setting) begins blinking, then press rt.

●For fine tuning adjustment, press e until “+/–” begins blinking, then press rt. While tuning, “+” or “–” appears.

●When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER” setting cannot be changed. ( pg. 63)

F Enter new channel information.

Press OK and the Confirmation screen appears.

●Repeat steps C – F as necessary.

G Close the Confirmation screen.

Press SET UP MENU.

●To change positions, see “Change Station Channel Position” ( pg. 81).

●If you wish to set station names other than the ones registered in your unit, see “Set Stations (B)” ( pg. 83).

ATTENTION

Guide Program numbers are not set when channels are stored manually. ( pg. 32, “VIDEO Plus+® Timer Programming”)