86

SUBSIDIARY SETTINGS (cont.)

Clock Set

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set “ON” or “OFF” at the Clock Set screen (the default setting is “OFF”). Press OK until the Just Clock setting begins blinking, then press rt to change the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to “OFF”.

IMPORTANT

If you performed Auto Set Up ( pg. 16) or Preset Download ( pg. 18), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download.

OR

—you want to change Just Clock setting. ( “Just Clock” in the left column)

A Turn on the unit.

Press 1.

B Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

C Access the Main Menu screen.

Press SET UP MENU.

D Access the Clock Set screen.

Press rt to move the highlight bar (pointer) to “CLOCK SET”, then press OK or e. The Clock Set screen appears.