17

C Confirm/Set video channel.With RF Connection

The video channel that is shown on the display panel is your video channel. Press OK.

●To view picture signals from the unit, set your TV to the video channel.

With AV Connection Press PR – until the display panel shows “CH – –”. Now the video channel is set to off. Then press OK.

●To view picture signals from the unit, set your TV to its AV mode.

ATTENTION

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit performs only Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

●Video channel setting (for RF connection users)  pg. 88

●Tuner setting  pg. 78

●Clock setting  pg. 86

If a new station starts broadcasting in your area, perform tuner setting ( pg. 78) and, if necessary, video channel setting ( pg. 88).

NOTES:

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or SET UP MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A.

●Auto Clock Set may not function properly depending on the reception condition.

After “Auto Set Up” is completed, perform “Monitor Set (DVD deck)” on page 20.