60 | EDITING |
Edit From A Camcorder
You can use a camcorder as the source player and your unit as the recording deck.
Slide the
A If the camcorder has no | A If the camcorder has no | |
|
| — connect the camcorder’s AUDIO OUT and VIDEO |
Recorder |
| OUT connectors to the unit’s front panel AUDIO and |
| VIDEO input connectors. | |
|
| B If the camcorder has an |
|
| — connect the camcorder’s AUDIO OUT and |
|
| |
|
| AUDIO and |
|
| ● When using a monaural camcorder, connect its AUDIO OUT |
|
| connector to the AUDIO L input connector on your unit. |
AUDIO input | To PAUSE | ● When a Master Edit |
connector | the camcorder is capable of controlling the unit. Refer to the | |
VIDEO |
| camcorder’s instruction manual for operating procedure. |
|
| |
input |
| B Select the |
Audio cable (not provided) |
| |
Video cable (not provided) | On the unit | |
| (not provided) | Press |
VIDEO OUT | (JVC camcorder | lights up. |
only) |
| |
| On the remote control | |
|
| |
AUDIO OUT |
| Press |
Camcorder |
|
|
Player | EDIT |
| Press AUX (number key “0”) and/or PR to select | |
|
|
| the AUDIO and VIDEO input connectors, or | |
B If the camcorder has an | AUDIO and | |||
the connectors being used. | ||||
|
|
| ||
Recorder | D Set the edit mode. | |||
|
| |||
|
|
| See “PICTURE CONTROL” on page 71. | |
|
|
| E Start the camcorder. | |
|
|
| Engage the Play mode of the camcorder. | |
| AUDIO input | To PAUSE | F Start the unit. | |
|
| connector | ||
Audio cable (not provided) |
| Engage the Record mode of the unit. | ||
| NOTES: | |||
|
| ● All necessary cables can be obtained from your dealer. | ||
|
| ● When you select “EDIT” to dub tapes in step D, be sure to | ||
|
| (not provided) | ||
|
| select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) | ||
| (JVC camcorder | |||
| after you finish dubbing the tapes. | |||
| only) | |||
|
|
| ||
Camcorder | AUDIO OUT |
|
| |
|
|
| ||
Player | EDIT |
|
| |
|
|
|