68SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector.

NOTES:

●Set “L-2 SELECT” to “A/V”. ( pg. 63)

●You can use Automatic Satellite Programme Recording function ( pg. 37) with this connection. (S-VHS deck only)

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel. (S-VHS deck only)

●For details, refer to the instruction manual of the satellite receiver.

Outdoor unit

Aerial

Aerial

connector

 

Back of TV

Satellite cable

TV aerial cable

 

Satellite receiver

ANTENNA

IN

ANTENNA

OUT

21-pin SCART connector

Back of unit

Mains outlet

IMPORTANT

When you set “L-2 SELECT” to “SAT” ( pg. 63), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the front display panel.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the unit to the video mode.