34

OPERATIONS ON S-VHS DECK (cont.)

Express Timer

Programming

If you do not know the PlusCode number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.

Before performing Express Timer Programming:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

Example: To timer-record the programme from 21:00 to 22:00 on 25th December, on channel 1.

A Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

B Access the VIDEO Plus+ screen.

Press PROG.

C Access the Programme screen.

Press START +/–. (If you’re just starting out, “P1” appears.)

The front display panel looks like this:

D Enter the programme start time.

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

The front display panel looks like this:

E Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

F Enter the programme date.Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.