„ Language, „ Picture Tilt, „ AI Volume | JVC HV-Z29V1, HV-Z34L1

Using the TV’s menu

•The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a picture in the no- signal state appears.

LANGUAGE

You can choose the language you want to use for the on-screen display from the language list in a menu.

1Choose LANGUAGE, then press the OK button.

2Press the 6 buttons to choose a language.

3Press the OK button to complete the setting.

The menu disappears.

PICTURE TILT

There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt.

1Choose PICTURE TILT, then press the OK or 3 button.

> PICTURE TILT

OK

D0018-EN

2Press the 6 buttons until the picture becomes level. Then press the OK button.

VIDEO-2 SETTING/VIDEO-3

SETTING

Set the VIDEO-2 SETTING or VIDEO-3 SETTING correctly according to the video signal input from the external device connected to the VIDEO-2 or VIDEO-3 terminal. If this setting is incorrect, images will not be displayed.

VIDEO:

If a normal video signal (composite video signal) is input.

COMPONENT:

If a Component video signal (Y, Cb/Pb, Cr/Pr signals) is input.

•For detailed connecting methods, see “Additional preparation” on page 36. This Television is compatible with the 1125i, 625p or 525p video signal only when the component video signal is input.

•When the input signal is 1125i, 625p or 525p, each signal type is displayed at the upper right side on the TV screen by setting the input to VIDEO-2 or VIDEO-3.

AI VOLUME

You can prevent the sudden increase or decrease of sound that occurs when changing the channel to another channel or switching the VIDEO mode to another VIDEO mode.

ON:

This function is turned on.

OFF:

This function is turned off.

•The AI VOLUME function may not operate as expected if the sound input level from a broadcast station (or video software) is extremely low.

•When the Video or the DVD is used, it is recommended to select OFF to get more dynamic sound.

33

Image 33

JVC HV-Z29V1, HV-Z34L1, HV-Z34L1, HV-Z29L1 „ Language, „ Picture Tilt, „ VIDEO-2 SETTING/VIDEO-3 Setting, „ AI Volume

Contents

HV-Z34L1 HV-Z29V1 S.T. demonstration Connecting the aerial and VCR Connecting the woofer unit only for HV-Z29V1If not connecting a VCR see Fig. a Fitting the woofer unit Putting the batteries into the remote control Connecting the power cordMaking the initial settings Setup Tour Now, setting up is complete. Please enjoy your new JVC TV Turn the TV on from standby mode Turn the main power onAdjust the volume Remote control sensor 7 VIDEO-4 terminal VIDEO-2 Component terminal VIDEO-1 terminalVIDEO-3 Component terminal = Output terminal ~ Press the # button Remote control buttons and functions Muting button Watch images from an external deviceZoom button Cinema Surround button RETURN+ button Sound Mode buttonBass button RETURN+ function Choose a TV channel or a Video terminal Display buttonFavorite channel registration Return function Twin and PIP picture in picture function „ Setting the picture effect„ Recalling the favorite channel „ Showing the favorite channels „ TV channel selection „ Listening to the sound Sub-picture„ Input source selection TV, VIDEO-1, -2, -3 or „ Swapping the pictures „ Changing the sub picture Position in PIP mode only „ Setting the colour system Sub pictureMulti-picture function Freeze function Set the PIP/TV/DVD switch to the PIP positionStrobe function Press the Strobe button Viewing a teletext programme Operating a JVC brand DVD player Sub-page Using the List mode SET UP menu Buttons used to operate the menus Types of menuPress the Hbutton to display the menu bar „ Adjusting the picture „ Picture ModePicture menu Operation with the buttons on To return to the default settings in each Features menu„ White Balance „ Digital VNR „ Super DigiPure „ Pull DownDigiPure function Choose Colour SYSTEM. Then press the a or 3 button Press the 5 buttons to choose Main or SUBNtsc „ Zoom Sound menu„ Multi „ Stereo „ Headphone Volume „ Sound Mode„ Balance „ Cinema Surround „ Channel Guard „ Sleep Timer „ Blue Back „ Appearance„ Child Lock „ Auto Shutoff „ Video Setting „ Favorite Setting Setup menu „ Auto ProgramChoose Auto PROGRAM, then press the OK button Choose EDIT/MANUAL, then press the OK or 3 button „ EDIT/MANUAL Press the 6 buttons to choose a new programme number Functions Press the 6 buttons to choose a PreparationProgramme number for which you will Register a new TV channel „ AI Volume „ VIDEO-2 SETTING/VIDEO-3 Setting„ Language „ Picture Tilt „ Teletext Language SettingPress the OK button to complete Choose Teletext LANGUAGE, then Channel CH/CC number Before connecting anything „ Connecting the external Devices Connecting devices to the Output terminal Connecting methods Connecting Headphones „ Connecting AV Compu Link Supported DevicesSetting up the AV Compu Link remote control system If a VCR is connected to the VIDEO-2 Component terminal If a DVD player is connected to VIDEO-1 terminal „ If you cannot turn on the TV „ No picture/No sound„ Poor picture „ Poor sound „ Operation disabled „ Other concerns Design and specifications subject to change without notice Specifications Victor Company of JAPAN, Limited LCT1460-001A-H 1103-CR-JMT S.T. demonstration Setting up your TV Setup Tour Now, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal Remote control buttons and functions Adjust the volume RETURN+ button Display button Twin and PIP picture in picture function „ Listening to the sound Sub-picture Multi-picture function Freeze function Operating a JVC brand DVD player Sub-page Using the List mode Using the TV’s menu Picture menu Features menu „ Pull Down „ Colour System Sound menu „ Sound Mode Features menu „ Appearance „ Favorite Setting Setup menu „ EDIT/MANUAL Functions To cancel the Insert function „ Language „ Teletext Language CH/CC number Additional preparation Connecting methods Connecting Headphones If a DVD player is connected to VIDEO-1 terminal Troubleshooting „ Poor sound „ Other concerns Specifications Victor Company of JAPAN, Limited