Troubleshooting
•Has COLOUR or BRIGHT been controlled properly? Follow the description “Adjusting the picture” on page 20 to try to adjust them properly.
•Videotaping teletext is not recommended because it may not record correctly.
•When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.
It is a phenomenon unavoidable due to the nature of the picture tube itself, and not due to a TV failure.
When the picture disappears from the screen, the unnatural colours will also disappear.
•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal, and not because of malfunction.
Poor sound
•When the TV channel reception is poor, it can be hard to hear the stereo or bilingual sound. In this case, follow the description “STEREO / I•II” on page 24 to hear the sound more easily by changing it to a mono sound.
Operation disabled
•Have the batteries of the remote control become exhausted? Follow the description “Putting the batteries into the remote control” on page 4 and replace them with new batteries to try solve the problem.
•Have you attempted to use the remote control at the sides or rear of the TV or at a location more than seven meters apart from the TV location? Operate the remote control in the front of your TV or a location less than seven meters from your TV to try to solve the problem.
•When you are viewing a teletext programme, you cannot operate the menus.
Press the BACK or TV/VIDEO button to return the teletext programme to the ordinary TV programme to try operating the menus.
•Is the CHILD LOCK function set to ON? If the CHILD LOCK function is set to ON, you cannot operate the TV with the front control buttons of the TV. Follow the description “CHILD LOCK” on page 27 to try to set the CHILD LOCK function to OFF.
•If the TV operation becomes disabled suddenly, press the Main power button on the TV and turn off the main power. Try to press the Main power button again to turn on the main power. If the TV returns to a normal state, it is not a failure.
•The following functions do not operate when receiving 1125i, video signal.
-Twin, PIP,
41
