You can select and store a preset sound adjustment suitable for each playback source. (Advanced SCM)
ENGLISH
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD and external components.
•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM” on page 45.
“Link” indicator
2 1
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
Within
5 seconds
2
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows:
BEAT 
SOFT 
POP 
OFF
•If the “Link” indicator is lit on the display (with “SCM LINK” set to “SCM LINK ON” — see page 45), the selected sound mode can be stored in memory for the current source, and the effect applies to the current source.
•If the “Link” indicator is NOT lit on the display (with “SCM LINK” set to “SCM LINK OFF”), the selected sound mode effect applies to any source.
Indication | For: |
| Preset values | |
|
| Bass | Treble | BBEII |
OFF | (Flat sound) | 00 | 00 | BBE 2 |
|
|
|
|
|
BEAT | Rock or disco music | +02 | 00 | BBE 2 |
|
|
|
|
|
SOFT | Quiet background music | +01 | Off | |
|
|
|
|
|
POP | Light music | +04 | +01 | Off |
19