2
STOP
PLAY
Select the operation you want to store into the Access Command. (In this case, select “FM 89.5 MHz.”)
ENGLISH
If you want to memorize the sound mode at the same time
Select the sound mode you want. (See page 19.)
Note:
Preset number cannot be stored but only its station frequency is stored in the user voice command.
3
Press and hold VOICE until Access Command (VOICE 14) appears on the display.
4
Press STR (ATT) to make the System ready to record your voice.
“SPEAK” starts flashing on the display after the voice navigation “Please speak now.”
5
Speak the word(s) you want to record while “SPEAK” is flashing on the display. (In this example, speak “Jazz 89.”)
•If the System recognizes your word(s), “REPEAT” starts flashing on the display after the voice navigation “Please repeat.”
•If the System does not recognize your word(s), it will ask you to speak again. In this case, speak the word(s) again.
TO BE CONTINUED ON THE NEXT PAGE
31