EXTERNAL COMPONENT OPERATIONSPlaying an external component

When connecting an external component such as a VCR (KZ-V10) to the LINE IN plugs on the rear, you can select the component as the sound source.

You can also connect the TV to this unit.

ENGLISH

2 1 2

1

Select the external component.

Each time you press the button, the source changes as described on page 6.

2

Operate the external component.

If the VCR KZ-V10 is the external source to play, you can perform the following operations using the buttons on the unit or on the remote control.

: Turns on or off the VCR. 7: Stops playback.

1: Rewinds the tape if pressed and held while watching a video tape.

3: Starts playback.

¡: Fast-forwards the tape if pressed and held while watching a video tape.

Notes:

•For the external component connection, see the Installation/Connection Manual (separate volume).

•See also “Assigning names to the sources” on page 48 if you want to match the name shown on the display with the name of the connected component.

Using a subwoofer

By connecting a subwoofer to the SUBWOOFER OUT plugs on the rear, you can enjoy enhanced bass sounds and a more realistic theater atmosphere in your car.

• Refer also to the instructions supplied with your subwoofer.

To set the subwoofer cutoff frequency, see “To select the subwoofer cutoff frequency” on page 46.

To adjust the subwoofer output volume, see “Adjusting the sound” on page 17.

53