Item |
| Description |
G ND Filter Position | Displays the current ND filter position. | |
| No display | : [ND FILTER] is set to AOFFB |
| ND1/4 | : [ND FILTER] is set to A1/4B |
| ND1/16 | : [ND FILTER] is set to A1/16B |
Memo:
●You can turn ON/OFF the display using [Filter] of [Status Display] in the [LCD/VF] menu. (A Page 84)
HRemaining Space on Displays the remaining recording time of the external device (0 to 999). When the remaining time is running out,
External Device | this is indicated in red (value + unit of measurement) as a warning to the user. | |
Memo: |
| |
|
| |
|
| |
| ● Only warnings are displayed in the STATUS 0 and STATUS 4 Screens. | |
IOperation of External Displays the operating status of the connected external device. For details, refer to the instruction manual of the
Device | corresponding external device. |
| ||
Memo: |
|
|
| |
|
|
|
| |
|
|
|
| |
| ● Only warnings are displayed in the STATUS 0 and STATUS 4 Screens. |
| ||
|
|
| ||
|
|
| ||
J Time Code (TC)/ | Displays the time code (hour:minute:second:frame) or user’s bit data. |
| ||
User’s Bit (UB) | Example: Time code: | 0 0 : 0 0 : 0 0 : 0 0 |
| |
|
|
|
| |
|
|
| Colon (:) for |
|
|
| User’s bit: | FF EE DD 20 Dot (.) for drop frames |
|
| Memo: |
|
|
|
|
|
|
| |
| ● You can turn ON/OFF the display using [TC/UB] of [Status Display] in the [LCD/VF] menu. |
| ||
|
|
| ||
| ● You can select whether to display the time code or user’s bit using the [TC DISPLAY] switch on the inner |
| ||
| panel of the LCD monitor. |
| ||
|
|
|
|
|
97