JVC LST0904-001B manual 107

Enlarged Status Display on

LCD Monitor

You can enlarge and display only the characters of the status screen on the LCD monitor.

A

CH1

CH2

B

DF

J

C

FREE

STBY STOP REC REVIEW

1280 x 720

STBY

A

DD

I

D

min 60p HQ

100min

B 123 min

OK

67.8min

E

F G

H

Item

Description

A Audio Level Meter

Displays the audio levels of [CH-1] and [CH-2].

If the reference audio level (A-20dBBor A-12dBB) is exceeded, this is displayed in yellow. The AOverB area is

displayed in red. A48kB is the sampling frequency.

	Memo:
	● When [Rec Mode] in the [Rec Mode] menu is set to AVariable FrameB, audio cannot be recorded and is
	indicated by the		mark.
B Framing Mode	Displays the framing mode.
	[DF]	: Drop frame
	[NDF]	: Non-drop frame

CTime Code Generator Displays the operation mode of the time code. (Display: [FREE], [RECR], [REGN]) (A Page 46)

D Media Status	Displays the SDHC card status in characters and symbols.
	----	: No card found in the selected slot	RECC	: Clip Continuous recording (A Page 55)
	STBY	: Recording standby (recording pause)	STBYC (displayed in red)
	REC	: Recording		: Clip Continuous recording pause
	REVIEW : Clip Review (A Page 52)			(A Page 55)
	STBYP : Pre Rec recording standby (A Page 54)		STOP	: Unable to record to the card in the slot
	RECP	: Pre Rec recording (A Page 54)	POFF	: Power OFF
	STBYC : Clip Continuous recording standby
		(A Page 55)

ERemaining Space on Displays the remaining recording time on the SDHC card. The currently active slot is indicated with an enlarged

Media	black card icon with white letters. A key mark appears when the write-protect switch of the SDHC card is set.
F OK Mark	Appears as [OK] when the currently played clip is appended with an OK mark.
G Video Format	Displays the video format that is set. (A Page 36)
H Voltage/Battery	Displays the current status of the power supply in use.
Power			Display		Description
			12.3V	Currently powered by an AC adapter. The current voltage is shown on the right.
				If the supplied voltage from the AC adapter is low, the voltage value will be displayed in
				red as a warning.
			12.3V	Currently powered by a battery.
				When the battery power runs out, the battery mark appears hollow, and ARESB is
			200min	displayed.
				Memo:
		30%
				● The display on the right can be set using [Battery Info] of [Status Display] in the [LCD/
			RES	VF] menu. (A Page 85)

IOperation of External Displays the operating status of the connected external device.

Device	For details, refer to the instruction manual of the corresponding external device.
J Time Code (TC)/	Displays the time code (hour:minute:second:frame) or user’s bit data.
User’s Bit (UB)	0 0 : 0 0 : 0 0 : 0 0
	Colon (:) for non-drop frames
	Dot (.) for drop frames

Memo:

●During enlarged display of the status on the LCD monitor screen, the video image remains displayed on the viewfinder.

103