Menu Display and Detailed Settings

A/V Out Menu

* Default values are indicated in bold characters.

Item

Setting Values

 

 

 

 

Function

Output Terminal

Composite

 

For setting output signals from the [Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on

 

Component

 

the side of the camera recorder.

 

Off

 

Composite

: Outputs composite signals to the [Y/VIDEO] video signal output terminal.

 

 

Component : Outputs component signals.

 

 

 

 

 

 

Off

 

 

: Signals are not output.

 

 

 

Memo:

 

 

 

 

 

 

 

 

 

 

 

● When DV signals are input from the [IEEE1394] terminal, AComponentB cannot be selected.

 

 

 

When AComponentB is selected, this is switched automatically to ACompositeB output.

 

 

 

 

 

 

 

 

 

Down Convert

Side Cut

 

For setting the style of displaying down-converted images on a 4:3 aspect ratio screen. This

 

Letter Box

 

setting applies to all Composite/SD-SDI/DV outputs.

 

Squeeze

 

Side Cut

: Displays image with the left and right sides cut off.

 

 

Letter Box

: Displays as a wide image with the top and bottom blackened.

 

 

 

 

 

 

Squeeze

: Displays image that is squeezed horizontally.

 

 

 

 

Set Up

7.5% (U model)

 

For selecting whether to add a setup signal to the video signal output from the [Y/VIDEO]/[PB]/

 

0.0% (E model)

 

[PR] video signal output terminal (BNC) on the side of the camera recorder.

 

 

 

A setup signal can also be selected during signal input from the [IEEE1394] terminal.

 

 

 

7.5% : Adds setup signal.

 

 

 

0.0% : Setup signal is not added.

 

 

 

Memo:

 

 

 

 

 

 

 

 

 

 

 

 

● When [Frame & Bit Rate] is set to A50p(SP)B, A50p(HQ)B, A50i(SP)B, A50i(HQ)B, A25p(SP)B,

 

 

 

or A25p(HQ)B, this item appears as A---Band cannot be selected. (A Page 71)

 

 

 

● Depending on the menu settings of the camera recorder and the condition of the cable

 

 

 

connected to it, the setup signal setting may be fixed at A0.0%B. A0.0%B is displayed in gray in

 

 

 

this case.

 

 

 

 

 

 

 

 

 

 

 

HD/SD-SDI Out

HD-SDI

 

For specifying whether to output SDI signals from the [HD/SD-SDI] output terminal on the side of

 

SD-SDI

 

the camera recorder.

 

Off

 

HD-SDI: Outputs HD-SDI signals. Embedded (superimposed) audio signals and the time code

 

 

 

 

are also output.

 

 

 

 

 

 

 

 

SD-SDI : Outputs SD-SDI signals down converted from HD. Embedded (superimposed) audio

 

 

 

 

 

signals and the time code are also output.

 

 

 

Off

 

: SDI signals are not output.

 

 

 

Memo:

 

 

 

 

 

 

 

 

 

 

 

 

● When DV signals are input from the [IEEE1394] terminal, AHD-SDIBcannot be selected.

 

 

 

● User’s bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid

 

 

 

video signals. Therefore, accurate values will not be output.

 

 

 

 

 

 

 

 

 

Analog Out Char.

On

 

For selecting whether to display status and menu characters on the screen output from the [Y/

 

Off

 

VIDEO]/[PB]/[PR] video signal output terminal (BNC) on the side of the camera recorder.

 

 

 

On

: Turns on display.

 

 

 

Off

: Turns off display.

 

 

 

Memo:

 

 

 

 

 

 

 

 

 

 

 

 

● When [Analog Out Char.] is set to AOnB, the details shown on the viewfinder are also

 

 

 

displayed in the image output from the video signal output terminal (BNC).

 

 

 

 

 

 

 

 

 

SDI Out Char.

On

 

For selecting whether to display status and menu characters on the screen output from the [HD/

 

Off

 

SD-SDI] output terminal on the side of the camera recorder.

 

 

 

On

: Turns on display.

 

 

 

Off

: Turns off display.

86