Place the microphone in the microphone holder.
Preparations

Attaching Accessories

Attaching the Zoom Lens

(Supplied with GY-HM700U/GY-HM700E only)

Attaching the Microphone (Supplied)

You can attach the supplied microphone to the microphone holder.

The supplied microphone has a phantom power supply.

1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder.

2

3 Turn the knob on the microphone holder clockwise to secure the microphone.

Hole

 

 

4

Connect the microphone cable to the [INPUT1] or

1

3

Pin

[INPUT2] terminal.

 

5

Pin the microphone cable to the clamp.

 

 

 

 

2

 

6

Make sure to perform the correct settings for the

 

 

 

phantom microphone (A Page 44).

 

Clamp

4

 

 

1

Loosen the mount ring.

 

2

Attach the zoom lens such that the pin matches the

hole of the mounting area.

 

Knob

Microphone

Microphone Holder

3

Tighten the mount ring.

 

4

Connect the cable connector.

Clamp

5

Attach the lens cable to the clamp.

 

Memo:

 

● Tighten the mount ring completely. If it is not fully

 

 

tightened, the lens may drop or the back focus may be out

 

 

of alignment.

[INPUT1/INPUT2] Terminal

●

When attaching or removing the zoom lens, set the

 

[POWER] switch of the camera recorder to AOFFB.

19