Names of Parts (continued)

Side Terminal

A

B M

CL D

E F

G HI J K

A[HD/SD-SDI] HD/SD-SDI Output Terminal (BNC) (A Page 114)

B[Y/VIDEO] Y/Composite Video Signal Output Terminal (BNC) (A Page 114)

C[PB] PB Video Signal Output Terminal (BNC) (A Page 114)

D[PR] PR Video Signal Output Terminal (BNC) (A Page 114)

E[REMOTE] Remote Terminal (A Page 119)

F[DC INPUT] DC Input Terminal (A Page 21)

Input terminal for DC 12 V power supply. Connects with an AC adapter.

G[AUDIO OUTPUT] Audio Output Terminal (RCA)

Output terminal for audio signals.

●Input audio signals are output during Camera mode.

●Playback audio signals are output during Media mode.

●Audio from input audio signals is output during HD/DV signal (IEEE1394) input.

Memo:

●Alarm tone is not output.

H[HD/DV] IEEE1394 Terminal Mode Switch (A Page 115)

I[INT/EXT] IEEE1394 Interface Terminal Switch (A Page 115)

For selecting a valid IEEE1394 interface terminal.

[EXT] : Enables IEEE1394 signals from the [IEEE1394] terminal M.

[INT] : Enables the accessory connector B at the rear of the camera recorder. (A Page 13)

JShoulder Pad Slide Button

For adjusting the shoulder pad position. Press this button to adjust the shoulder pad K position to the front or back.

KShoulder Pad

L[USB] USB Terminal (A Page 118)

M[IEEE1394] IEEE1394 Terminal (4-pin)

For connecting digital video equipment with IEEE1394 terminal using an IEEE1394 cable (sold separately).

To enable this terminal, set the [INT/EXT] IEEE1394 terminal switch I to [EXT].

(A Page 115 [IEEE1394 Connection])

(A Page 117 [Stream Transmission to a Non-linear Editing System])

Note:

●When connecting IEEE1394 cables, check that the connectors are facing the right direction before you insert.

Memo:

●Put on the covers when the connectors are not in use.

12