Operation Mode
This camera recorder has three operation modes - Camera mode, Media mode, and USB mode. The operation mode indicator on the left side of the camera recorder lights up according to the mode.
Camera Mode |
|
| Media Mode | |
Camera Mode | [CAM/MEDIA] Selection Button |
| IEEE1394 | |
|
|
| ||
|
|
| Mode | |
|
|
|
| |
| [CAM/MEDIA] Selection | |||
| Button |
|
|
|
[CAM/MEDIA] |
|
|
|
|
Selection |
|
| SD Card Mode | |
Button | Thumbnail | Playback |
| Playback |
| Button |
| ||
| Display |
|
| (Playback/Pause/Fast Forward/ |
|
| Stop Button | Rewind/Clip Jump) | |
|
|
| ||
|
| USB Connection (when the confirmation to change | ||
|
| to USB mode appears and [Change] is selected) | ||
Connection |
|
|
|
|
disabled on PC | USB Mode |
|
| |
|
|
| ||
| (USB mass storage class) |
| ||
[CAM/MEDIA] Button
Operation Mode Indicator
Stop Button
Playback Button
Operation Mode | Operation |
|
|
| Description | |
Mode |
|
|
| |||
|
| Indicator |
|
|
|
|
Camera Mode | Blue |
| This is the camera shooting mode. The camera recorder starts up in Camera mode when the power is turned on. | |||
|
|
|
| Memo: |
| |
|
|
|
| |||
|
|
|
| ● Images recorded on the SDHC card cannot be played back in this mode. However, you can check (play | ||
|
|
|
| back) the most recently recorded image using the Clip Review function. (A Page 52) | ||
|
|
|
|
|
| |
|
|
|
|
| ||
|
| Purple |
| When [Rec Mode] is set to AVariable FrameB, the operation mode indicator lights up in purple during Variable | ||
|
|
|
| |||
Media | SD Card | Green |
| This mode allows you to play back or delete clips recorded on the SDHC card. | ||
Mode | Mode |
|
| Press the [CAM/MEDIA] selection button to enter SD Card mode when you are not shooting in Camera mode. | ||
|
|
|
| Once the camera recorder is in SD Card mode, thumbnails of the selected media slot are displayed. | ||
| IEEE1394 | Orange |
| This is the input mode for video images from the | ||
| Mode |
|
| The camera recorder enters IEEE1394 mode when you press the [CAM/MEDIA] selection button while the | ||
|
|
|
| power of the equipment connected to the [IEEE1394] terminal is turned on during thumbnail display in Media | ||
|
|
|
| mode (SD Card mode). | ||
|
|
|
| Once the camera recorder is in IEEE1394 mode, the playback images of the connected equipment are displayed. | ||
|
|
|
| However, if the IEEE1394 connection is not recognized (such as when the power of the | ||
|
|
|
| equipment is not turned on), the camera recorder will switch to Camera mode instead. | ||
|
|
|
| Press the [CAM/MEDIA] selection button during IEEE1394 mode to switch to Camera mode. | ||
|
|
|
| If the power of the equipment connected to the [IEEE1394] terminal is OFF or if connection is canceled in | ||
|
|
|
| IEEE1394 mode, the camera recorder will not automatically switch to other modes. To quit IEEE1394 mode, | ||
|
|
| you must operate the [CAM/MEDIA] selection button. | |||
|
|
|
| Note: |
| |
|
|
|
|
| ||
|
|
|
| ● This mode is used for viewing images input to the [IEEE1394] terminal from an external device, and not | ||
|
|
|
| intended for recording input images on the camera recorder. | ||
|
|
|
|
| ||
|
|
|
|
| ||
USB Mode | Orange |
| This mode allows you to connect to a PC and transfer the files on an SDHC card to the PC. | |||
|
|
|
| When the camera recorder is connected to a USB cable, the message AChange to USB ModeB appears. | ||
|
|
|
| Select [Change] and press the Set button (R) to switch to USB mode. (A Page 118) | ||
|
|
|
| In USB mode, the camera recorder is recognized by the connected PC as a peripheral drive (USB mass | ||
|
|
|
| storage class only). Disable the connection on the PC and remove the USB cable from the camera recorder to | ||
|
|
|
| |||
|
|
|
| Memo: |
| |
|
|
|
|
| ||
|
|
|
| ● When a USB cable is connected, the message appears after recording stops. | ||
|
|
|
| ● If playback is in progress, the message appears once the files are closed automatically, such as when | ||
|
|
|
| playback stops. | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7