Symptom

Action

The date and time are not displayed.

● The date and time are only displayed on the STATUS 2 and STATUS 3

 

Screens in the Camera mode (during shooting). (A Page 98) (A Page 99)

No output from the [Y/VIDEO], [PB], and

● Is [Output Terminal] in the [A/V Out] menu correctly set? (A Page 86)

[PR] video signal output terminals.

 

 

 

Incorrect display on the viewfinder.

● Is the LCD used with [LCD + VF] in the [LCD/VF] menu set to AOffB?

 

(A Page 82)

IEEE1394 connection between the camera

● Is the operation mode correctly set? (A Page 7)

recorder and the external device cannot

● Is the [INT/EXT] IEEE1394 interface terminal switch correctly set?

be established (e.g., no image on the

● Is the [HD/DV] IEEE1394 terminal mode switch correctly set?

● Check the connection, such as by removing the IEEE1394 cable and inserting

camera recorder and/or external device).

it again, or by reconnecting the power.

 

 

 

125