Error Display |
|
|
|
| |
Status Screen | Menu/Thumbnail | Status |
|
| Action |
Screen |
|
|
|
| |
|
|
|
|
| |
^ | Power of the camera recorder is turned off |
| When making use of a connected external | ||
POWER ? |
| while the external device connection is |
| device, turn on the power supply on the | |
| detected, and the same connection cannot be |
| connected device. | ||
|
|
| |||
|
| detected several seconds after power is turned |
|
|
|
|
| on again. (Error displays for about 7 seconds) |
|
|
|
|
|
|
|
| |
VIDEO FORMAT | ^ | ● Video format of the file for Clip Review is |
| Set [Camera Resolution] and [Frame & Bit | |
INCORRECT |
| different from the [Frame & Bit Rate] setting |
| ||
| of the camera recorder. |
|
|
| |
|
|
|
|
| |
|
| ● IEEE1394 input video format is different |
|
|
|
|
| from the [Camera Resolution] and [Frame & |
|
|
|
|
| Bit Rate] settings. |
|
|
|
|
| ● [HD/DV] terminal mode switch is not |
| Set the [HD/DV] terminal mode switch | |
|
| correctly set for IEEE1394 input signals. |
| according to the IEEE1394 input signals | |
|
|
|
| correctly. | |
|
|
|
|
| |
MEDIA FULL | ^ | ● [REC] button is pressed when the media in |
| Replace the SDHC card with a new one. | |
|
| use has no remaining space. |
|
|
|
|
| ● Remaining space ran out during recording. |
|
|
|
|
|
|
|
| |
FAN MAINTENANCE | ^ | ● Usage time of the fan has exceeded 9000 |
| Check the fan and replace accordingly. For | |
REQUIRED |
| hours. |
| more details, consult your nearest JVC dealer. | |
|
|
|
| Memo: |
|
|
|
|
| ||
|
|
|
| ● You can check the usage time of the fan at | |
|
|
|
| [Others]B[System Information]B[Fan Hour]. | |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
The tally lamps start blinking when the remaining space on the SDHC card is running out during recording, or when the battery power is running low.
Blinking Mode | Remaining Battery Power/SDHC Card Space |
Blinks slowly | ● Battery power is low |
(Once every second) | ● Remaining recording time on SDHC card is less than 3 minutes |
|
|
Blinks quickly | ● SDHC card is full |
(4 times a second) | ● Error on the camera recorder |
|
|
Alarm tone is output from the monitor speaker and [PHONES] terminal when the battery level is low.
Alarm tone is output from the monitor speaker and [PHONES] terminal when the SDHC card is full. (Camera mode only) Alarm tone is also output when an error occurs in the camera recorder.
Memo:
●[Alarm Level] in the [Others] menu can be used to specify whether alarm tone is to be output, as well as the volume level. (A Page 87)
●Alarm tone is not output during recording.
123