JVC LST0904-001B Camera Features, Hue Range Detection,  Color Range Setting, Using the Skin Detail Function

Camera Features

	 Color Range Setting
Smoothening the Skin
	1 Place the cursor at [Skin Color Range] with the cross-
Color (Skin Detail
	shaped button (JK).
Function)	2 Press the Set button (R) or cross-shaped button (I) to
	move the cursor to a setting value.

The Skin Detail function can be used to reduce the contour enhancement of video signals for only the skin areas so as to produce a smoother skin tone.

Preparations Before Using the Skin Detail Function (Skin Adjust Function)

1 Adjust the white balance. (A Page 40)

2 Display the [Skin Color Adjust] screen. (A Page 78)

●Select [Main Menu]B[Camera Process]B[Detail]/ [Adjust]B[Skin Color Adjust], and press the Set button (R).

●The entire image switches to black-and-white display, leaving only the detected skin areas in color.

Skin Color

Detection Frame

2

3 Select a setting value using the cross-shaped button (JK), and press the Set button (R).

Select a setting within the [Narrow, -1 to -9, Normal, 9 to 1, Wide] range.

4 Place the cursor at [Back] after setting is complete, and press the Set button (R).

The data is saved, and the screen returns to the [Detail] menu.

Memo:

●The displays for [Bars], [Zebra], markers ([Aspect Marker]/ [Safety Zone]/[Center Mark]), [Focus Assist] mode, and

[B] mode in the [VF Display] menu are temporarily turned AOffB.

Using the Skin Detail Function

1 Set [Skin Detect] to AOnB. (A Page 78)

●Select [Main Menu]B[Camera Process]B[Detail]/ [Adjust]B[Skin Detect] and set to AOnB.

●AS.DTLB appears on the STATUS 0 and 1 Screens of the LCD monitor and viewfinder when the Skin Detail function is activated.

AS.DTLB appears

Hue Range Detection

1 Project the detected object inside the skin color detection frame.

2 Place the cursor at [Skin Color Detect] with the cross- shaped button (JK).

3 Press the Set button (R).

Display switches from AStopB to AExecuteB, and detection starts.

Memo:

●AErrorB is displayed if the object inside the frame is not within the preset color range.

4 Press the Set button (R) after the desired hue range is detected.

●If no AErrorB is displayed, the data is saved and the process ends.

●If AErrorB appears, the process ends without saving the data.

5 Place the cursor at [Back] after the hue range is detected, and press the Set button (R).

Returns to the [Detail] menu screen.

1280x720	30/24 fps			0 0 : 0 0 : 0 0 :	0 0
24p HQ
OK
				MAX 12	3%
				MIN 45%
				SKIN AREA
A 100min				S.DTL
				B -3
B 100min			ND1/16 A<3200K>
STBY		282min

STATUS 1 Screen

2 Set the adjustment level for the contour enhancement of the skin tone. (A Page 78)

Set using [Main Menu]B[Camera Process]B[Detail]/ [Adjust]B[Skin Color Detect]/[Level].

106