JVC LST0904-001B manual 81

* Default values are indicated in bold characters.

	Item	Setting Values				Function
White Clip		100%	For setting the point to apply white clip for input video signals with a high luminance level.
		108%	100% : Applies white clip at the point where the luminance level is 100 %. Even when this
					item is set to A108%B, it switches automatically to A100%B if the screen appears too
					white. Set to this value when the system in use limits Y output signals within 100 %.
			108% : Applies white clip at the point where the luminance level is 108 %.
Gamma		Film Out	For adjusting the gamma curve that determines the gradation expression.
		Cinema	Film Out : Sets to a gamma curve that focuses on the gradation expression of dark areas in
		Standard			order to ease post-processing of movie film output.
			Cinema		: Sets to a gamma curve with similar gradation to the screen characteristics of
		Off
					movies.
			Standard : Sets to a standard gamma curve.
			Off		: Disables gamma curve adjustment.
	Master Level	Max, 4 to1,	This item can be specified separately when [Gamma] is set to AStandardB, ACinemaB, or AFilm
		Normal,	OutB.
		-1 to -4, Min	Increase the number : Enhances the gradation of black. However, the gradation of bright
						areas deteriorates.
			Decrease the number : Enhances the gradation of bright areas. However, the gradation of
						black deteriorates.
			Memo:
			● When [Gamma] is set to AOffB, this item appears as A---Band cannot be selected.
	R Level	Max, 4 to1,	Gamma curves can be adjusted for each of R, G, and B.
		Normal,	Use this to adjust to a color tone that cannot be expressed by the [Color Matrix] setting.
	G Level
		-1 to -4, Min	Memo:
	B Level
			● When [Gamma] is set to AOffB, this item appears as A---Band cannot be selected.
White Balance...		Menu for adjusting white balance. (A Page 79)
Color Matrix		Cinema Subdued	For setting the color matrix.
		Cinema Vivid	Cinema Subdued			: Sets to a subdued color matrix that is similar to the screen characteristics
		Standard				of movies.
			Cinema Vivid			: Sets to a vivid color matrix that is similar to the screen characteristics of
		Off
						movies.
			Standard			: Sets to a standard color matrix.
			Off			: Sets the color matrix function to Off.
	Adjust...	This item is used to adjust [Color Matrix] to a color according to the user’s preference.
		This item cannot be selected when [Color Matrix] is set to AOffB. (A Page 80)
Color Gain		Off, Min, -1 to -9,	For adjusting the video signal color level.
		Normal	Off			: Sets the video to black-and-white.
		9 to 1, Max	Increase the number : Makes the colors more dense.
			Decrease the number : Makes the colors less dense.
			Memo:
			● Images are displayed in black-and-white when this is set to AOffB.
DNR		On	For setting the DNR (Digital Noise Reduction) function. The S/N ratio of the video can be
		Off	enhanced by setting [DNR] to AOnB.
			On	: Enables noise reduction.
			Off	: Disables noise reduction.
			Memo:
			● A retained image may appear when this is set to AOnB.
Reverse Picture		Rotate	For recording images correctly by reversing the image horizontally or vertically (Rotate) when
		Off	the lens image appears upside down or laterally inverted.
			Rotate		: Enables horizontal/vertical inversion of the image.
			Off		: Disables horizontal/vertical inversion of the image.
Reset Process		^	Restores all items in the [Camera Process] menu to their default settings.

77