JVC LVT1306-007A manual Setting the items, Setting the speakers, Press SET

4Press SET.

	O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
DIGITAL IN 1
	x	HP
		ATT

MHz kHz

DIGITAL IN 1:2DVR/DVD3

The current setting of the selected item appears.

23:OPERATE :BACK

The selected submenu appears.

5To select the appropriate setting, press 2 or 3 repeatedly, then press SET.

The on-screen display returns to the previous SETTING MENU. In this example, “SETTING MENU (4)” appears on the TV screen and “DIGITAL IN1” appears on the display.

•On the front panel, turn MULTI JOG, then press SET.

	O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
DIGITAL IN 1
	x	HP
		ATT

MHz kHz

DIGITAL IN 1:2DVR/DVD3

DVR/DVD VIDEO

TV VCR

6Repeat steps 2 to 5 to set other items if necessary.

NOTES

•To return to “TOP MENU,” press MENU on the remote control.

•To exit from menu operations, press MENU on the remote control when “TOP MENU” appears. On the front panel, press SETTING when a menu except “TOP MENU” appears.

•The setting item previously selected can be shown on the TV screen by pressing SETTING on the front panel when the receiver is in normal operation mode.

Setting the items

When performing the basic settings viewing the indications on the display, the indications are slightly different from what is shown on the on-screen display.

This is because of the limited number of characters shown on the display. Ex.: • “SUBWOOFER: YES” is shown as “SUBWFR: YES” on the display.

• “MIDNIGHT MODE: OFF” is shown as “NIGHT: OFF” on the display.

Setting the speakers

7Setting subwoofer information—SUBWOOFER

Each time the receiver turns on, the receiver detects the subwoofer connection and automatically changes the setting of the subwoofer.

When you want to change the setting manually, select either one below.

SUBWOOFER: YES

Select when you have connected a subwoofer.

The subwoofer indicator (S . WFR) lights up on the display. You can adjust the subwoofer output level (see page 29).

SUBWOOFER: NO

Select when you have disconnected a subwoofer. Selecting this changes the front speaker size to “LARGE” (see right column).

NOTE

You need to change the setting each time you turn on the receiver if you want to change the subwoofer information set automatically.

7Setting the speaker size—FRONT SPEAKER, CENTER SPEAKER, SURROUND SPEAKER

Register the sizes of all the connected speakers.

LARGE	Select when the cone speaker size is larger than
	12 cm.
SMALL	Select when the cone speaker size is smaller than
	12 cm.
NO	Select when you have disconnected a speaker.
	(Not selectable for the front speakers.)

Initial setting: SMALL for all speakers*

*When “SUBWOOFER” is set to “SUBWOOFER: NO,” the front speaker size is fixed to “LARGE” (and you cannot select “SMALL”).

NOTES

•If you have selected “SMALL” for the front speaker size, you cannot select “LARGE” for other speakers.

•If you change one of the speaker sizes either from “NO” to “SMALL” or “LARGE,” or from “SMALL” or “LARGE” to “NO,” the distance manually set will be applied instead of those set by using Smart Surround Setup.

21