Setting the digital input (DIGITAL IN)
When you use the digital input terminals, register what components are connected to which
Select one of the following components for each terminal:
DVR/DVD For the DVD player (or DVD recorder).
VIDEO For the component connected to the VIDEO IN jacks on the rear of the receiver.
VCR For the VCR.
TV | For the TV. |
Initial setting: DVR/DVD (for “DIGITAL IN 1”)
VIDEO (for “DIGITAL IN 2”)
TV (for “DIGITAL IN 3”)
NOTES
•You cannot assign the same component for different terminals. The priority order for assignment is as follows:
“DIGITAL IN 1” > “DIGITAL IN 2” > “DIGITAL IN 3.” “DIGITAL IN 1” can be set to any component.
Ex.: When “DIGITAL IN 1” is set to “TV.”
DIGITAL IN 1: TV
“DVR/DVD,” “VIDEO,” and “VCR” are selectable for “DIGITAL IN 2.”
And when “DIGITAL IN 2” is set to “DVR/DVD.”
DIGITAL IN 1: TV
DIGITAL IN 2: DVR/DVD
“VIDEO” and “VCR” are selectable for “DIGITAL IN 3.”
•Setting “DIGITAL IN 1” affects “DIGITAL IN 2” and “DIGITAL IN 3” settings. When you have changed “DIGITAL IN 1,” confirm the components assigned to “DIGITAL IN 2” and “DIGITAL IN 3.”
Setting the Auto Function mode
—AUTO MODE
The source will be selected automatically simply by turning on a video component.
•This function takes effect for the video components connected to the receiver using the SCART
Auto Function mode works as follows:
•When a video component is turned on, the receiver selects the video component as the source (and the TV input is changed automatically).
•When a video component currently selected as the source is turned off, the receiver changes the source to the video source previously
AUTO MODE: AUTO1
Auto Function mode works when the receiver is turned on or when TV Direct is activated.
AUTO MODE: AUTO2
Auto Function mode works when the receiver is turned on or off, or when TV Direct is activated. (When a video component is turned on while the receiver is off, TV Direct is activated and the receiver selects the video component as the source.)
AUTO MODE: MANUAL
You need to select the source manually.
Initial setting: AUTO MODE: MANUAL
When “AUTO MODE: AUTO1” or “AUTO MODE: AUTO2” is selected, the AUTO MODE indicator lights up on the display.
NOTES
•When selecting “VCR” as the source, “AUTO MODE: AUTO1” or
“AUTO MODE: AUTO2” may not work if you only turn on the VCR. If this happens, you may need to start playback to activate Auto Function mode.
•When Auto Function mode is set to “AUTO MODE: AUTO2,” the TV Direct may be activated after recovery from a power failure.
24
