JVC LVT1306-007A Activating the Surround/DSP modes, Mono Film, All Channel Stereo mode ALL CH ST

■MONO FILM

In order to reproduce a more acoustic sound field in your listening room while viewing monaural sound video software (analogue and 2-channel digital signals including Dual Mono signal), you can use this mode.

The surround effect will be added, and the sound localization of actor’s words will be improved.

This mode cannot be used for multi-channel digital signals.

When “MONO FILM” is used, sounds come out of all the connected (and activated) speakers.

•If the surround speakers are set to “NO” in the speaker setting (see page 21), JVC’s original 3D-PHONIC processing (which has been developed to create the surround effect through the front speakers only) is used.

The 3D indicator lights up on the display.

•If incoming signals change from 2-channel digital signal to another digital signal type, “MONO FILM” is canceled and an appropriate Surround mode is activated.

■All Channel Stereo mode (ALL CH ST)

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.

This mode cannot be used if the surround speakers are set to “NO” in the speaker setting (see page 21).

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the incoming signals. For details, see page 43.

Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments.

•To adjust the speaker output level, see page 29.

•To adjust the effect level for the DSP mode (except All Channel Stereo mode,) see page 31.

•To add “wraparound” sound effect to “PLII MUSIC” (PANORAMA control,) see page 31.

•To adjust the vertical localization of the center channel for Surround/DSP modes (except “PLII MUSIC” and “ALL CH ST”) (center alignment,) see page 31.

NOTES

•You cannot use any Surround/DSP modes when selecting “DVD MULTI” as the playback source.

•You cannot select All Channel Stereo mode if the surround speakers are set to “NO” in the speaker setting (see page 21).

•You cannot select MONO FILM mode if an incoming signal is a multi-channel (more than 2 channel) digital signal.

•The on-screen display appears on the TV screen to show the Surround/DSP mode name for 5 seconds when you select the Surround/DSP mode.

To cancel the function, set “SUPERIMPOSE” to “SUPERIMPOSE: OFF” (see page 25).

Sound reproduced from	Sound reproduced from All
normal stereo	Channel Stereo mode

3D HEADPHONE mode

If you connect a pair of headphones while one of the DSP modes is in use, the 3D HEADPHONE mode is activated without respect to the type of software played back.

“3DHEADPHONE” appears on the display and the DSP, 3D, and HP indicators light up.

CONTINUED ON THE NEXT PAGE

41