JVC LVT1306-007A manual To select Adjust MENU, press SET, 10 0 +10

Menu operating procedure

When operating, the on-screen display appears on the TV screen regardless of the SUPERIMPOSE setting (see page 25).

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. In this section, the operation of the remote control is used for explaining.

Ex.: When adjusting subwoofer output level.

Operations On the TV screen On the display

1 To show “TOP MENU,” press MENU.
		x	ATT
	TOP MENU	O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
Then press 5 or ∞ to select “ADJUST			HP
	5		kHz
			MHz
MENU.”	SETTING MENU
		“SETTING” appears.
	ADJUST MENU

∞

• On the front panel, turn MULTI JOG.

:ENTER :EXIT

“TOP MENU” appears.

2To select “ADJUST MENU,” press SET.

	O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
ADJUST MENU (1)
	x	ATT
		HP
5		MHz
		kHz

SUBWOOFER LEVEL	:	0
			The submenu previously
FRONT L LEVEL	:	0
FRONT R LEVEL	:	0	selected appears.
CENTER LEVEL	:	0
SURR. L LEVEL	:	0
SURR. R LEVEL	:	0

∞

:ENTER :TOP MENU

The adjustment item previously selected

appears.

3To select the desired submenu, press 5 or ∞ repeatedly.

There are three screens from “ADJUST MENU (1)” to “ADJUST MENU (3).” To change the screen, simply pressing 5 or ∞ repeatedly. You can go to the next/previous screen.

• On the front panel, turn MULTI JOG.

4Press SET.

SUBWOOFER LEVEL

SUBWOOFER :2 0 3

O P. BASS	TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
x	ATT
	HP
	MHz
	kHz

The current setting of the

selected item appears.

23:OPERATE :BACK

The selected submenu appears.

5To adjust the selected item, press 2 or 3 repeatedly, then press SET.

The on-screen display returns to the previous ADJUST MENU. In this example, “ADJUST MENU (1)” appears on the TV screen and “SUBWFR LVL” appears on the display.

•On the front panel, turn MULTI JOG, then press SET.

			O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
SUBWOOFER LEVEL			x	HP
				ATT
				MHz
				kHz
SUBWOOFER	:2	0 3

–10 0+10

6Repeat steps 2 to 5 to set other items if necessary.

28