JVC LVT1306-007A manual 1Press and hold STB 2Press STB, 4Release STB, Manufacturers’ codes for STB

❏Changing the transmittable signals for operating an STB

Set the mode selector to “AUDIO/TV/VCR/STB.”

1Press and hold STB .

2Press STB.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for STB” on the right.

4Release STB .

Now, you can perform the following operation on the STB.

STB : Turn on or off the STB.

After pressing STB, you can perform the following operations on the STB.

CHANNEL +/–:Change the channel numbers on the STB.

1 – 9, 0:Select the channel numbers on the STB.

See the instructions supplied with the STB for details.

5Try to operate your STB by pressing STB .

When your STB turns on or off, you have entered the correct

code.

If more than one code is listed for your brand of STB, try each

one until the correct one is entered.

Manufacturers’ codes for STB

Manufacturer	Codes
JVC	01, 02
Amstrad	03 – 06, 33
BT	01
Canal Satellite	22
Canal +	22
D–Box	26
Echostar	19 – 21, 23
Finlux	11
Force	30
Galaxis	29
Grundig	07, 08
Hirschmann	07, 19, 39
ITT Nokia	11
Jerrold	16
Kathrein	13, 14, 36
Luxor	11
Mascom	34
Maspro	13
Nokia	26, 28, 35
Pace	10, 27, 33
Panasonic	15
Philips	09, 25
RFT	12
Saba	37
Sagem	24, 31
Salora	11
Selector	31
Skymaster	12, 38
Thomson	37
TPS	24
Triax	32
Videoway	17, 18
Wisi	07

Initial setting: 01

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

48