How does Auto Surr work? | JVC LVT1306-007A specification

You can enjoy the Surround mode easily.

•For details about the Surround modes, see pages 38 and 39.

•When “AUTO SURR” is activated, the AUTO SR indicator lights up on the display.

How does “AUTO SURR” work?

•If a multi-channel signal comes in, an appropriate Surround mode will be selected automatically.

•If a Dolby Digital 2-channel or DTS 2-channel signal with surround signal comes in, “PLII MOVIE” will be selected.

•If a Dolby Digital 2-channel or DTS 2-channel signal without surround signal, or a Linear PCM signal comes in, “SURR OFF (stereo)” will be selected.

NOTES

Virtual Surround Back

When playing Dolby Digital Surround EX or DTS-ES software, you can enjoy surround back channel playback using the Virtual Surround Back.

EQ C.TONE		VIRTUAL SB AUDIO P. BASS				TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
LPCM	L		C	R	PL	ATT
DOLBY D	S . WFR LFE				NEO : 6	HP
DTS AAC					DSP 3D	MHz
DTS AAC	LS	SB		RS	DSP 3D	MHz
96 / 24	LS	SB		RS	AUTO SR	kHz

To activate the Virtual Surround Back, see page 22.

•“AUTO SURR” does not take effect in the following cases:

–While playing an analogue source.

–While selecting one of the fixed digital decode modes— “DOLBY D” or “DTS” (see page 13).

•While listening with the headphones, the 3D HEADPHONE mode (see pages 39 and 41) is activated without respect to the type of software played back.

•When “AUTO SURR” is selected, sound may not come out at the beginning of playback. If it occurs, select a Surround mode manually (see page 42).

Available Surround and DSP modes according to the incoming signal

The name of the mode shown below is the display indication.

*1 Virtual Surround Back may not be applied to some software.

*2 Not selectable if the surround speakers are set to “NO” in the speaker setting (see page 21).