JVC LYT0002-088B manual Clock Lithium Battery CR2025 Insertion/Removal, Remove OLD Battery

EN 11

Clock (Lithium) Battery CR2025 Insertion/Removal

This battery is necessary to operate the clock and to perform date/time settings.

Battery holder

3

Open switch

Battery cover	1	2	4
			5

1 OPEN BATTERY COVER

1Slide the open switch on the battery cover.

2Pull open the battery cover in the direction of the arrow.

2 REMOVE OLD BATTERY

Pull the battery holer out in the direction of the arrow and slide the battery down and out of the holder.

3 INSERT NEW BATTERY

Insert the battery, with the “+” side showing, in the holder.

4 REPLACE BATTERY HOLDER

Insert the battery holder into the battery cover.

5 CLOSE BATTERY COVER

Slide the open switch and close the battery cover.

NOTES:

●When the battery is depleted, the “ ” indicator appears in the LCD monitor after you turn the power on.

●See “SAFETY PRECAUTIONS” on page 2 for information on safe handling of lithium batteries.

●After changing the lithium battery, reset the date and time (☞ pg. 12).