JVC LYT0002-088B manual Snapshot Search, Rewind Tape, Begin Search, Press Snapshot again

EN 27

Snapshot Search

The Snapshot Search function enables you to quickly and easily access scenes recorded in the Snapshot mode, or scenes where Strobe (☞ pg. 41) was used.

1 ENABLE SNAPSHOT SEARCH Set the Power Dial to “PLAY”.

2 REWIND TAPE

Press REW. Let the tape rewind to the begin- ning, where it stops automatically.

3 BEGIN SEARCH

Press SNAPSHOT. The camcorder begins searching for the first scene recorded in Snapshot mode or where the Strobe effect was used.

•If the first scene on the tape was recorded in Snapshot mode or with the Strobe effect, the camcorder may not be able to locate the exact beginning of the scene.

Snapshot Search could malfunction if the recorded tape has:

•Too little time between Snap shots •Blank space between recordings •Snap shots taken using Motor Drive mode

To Stop A Snapshot Search In Progress . . .

..... press SNAPSHOT again.

NOTE:

By attaching the camcorder to the Docking Station and connecting a video printer to the station, it is possible to print out snapshots. (☞ pg. 49).