JVC LYT0002-088B manual Recording Mode Setting, Hand Strap Attachment, Lens Cover Detachment

14EN GETTINGSTARTED (Cont.)

Recording Mode Setting

LCD	Set POWER to
monitor
	“REC”.

SP-LP recording mode switch

Set depending on your preference.

1 SET RECORDING MODE

Set SP•LP switch. “LP” (Long Play) is more economical, recording at 2/3 the speed of “SP” (Standard Play).

•Insert Editing or Audio Dubbing is impossible on a tape recorded in the LP mode.

Recording mode indicator

SP SPLP

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

Hand Strap Attachment

The provided Hand Strap helps you to keep a firm hold on the camcorder. Make sure you never hold the camcorder without using the Hand Strap.

Eyelet

Lens Cover Detachment

When using an optional conversion lens or lens filter (commercially available), you must first detach the lens cover.

Lens cover

Hand strap

1 2

1 ATTACH HAND STRAP

Slide the strap through the eyelet, pulling firmly to ensure secure attachment.

1 DETACH LENS COVER

Turn the lens cover in the direction of the arrow to detach it.

•To re-attach it, turn it in the opposite direction of the arrow.

•Do not forcefully re-attach the lens cover as this may damage its ridge, making further use of the lens cover impossible.

•Take care so that dust does not get on the lens.