JVC LYT0002-088B manual Remote Control Unit, Installing The Battery, RE-INSERT Holder

EN 17

Remote Control Unit

You can use the RM-V708U or RM-V710U to control the camcorder when it’s attached to the Docking Station.

RECORDING START/STOP Button (☞ pg. 66)

PAUSE IN connector (☞ pg. 60)

ZOOM Buttons (☞ pg. 56)

DISPLAY Button (☞ pg. 65)

T W

POWER ON/OFF Button When the camcorder’s Power Dial is set to “PLAY”, you can turn the unit’s power on and off using the Remote Control Unit.

SHIFT Button (☞ pg. 56)	AUDIO MONITOR
	Button (☞ pg. 65)
SLOW Rewind/Forward	MBR SET Button (☞ pg. 59)
Buttons (☞ pg. 53)	A. DUB Button (☞ pg. 65)
LEFT/RIGHT Buttons
(☞ pg. 56)	DOWN Button (☞ pg. 56)
FADE/WIPE Button
(☞ pg. 60)	INSERT Button (☞ pg. 66)
EFFECT Button
(☞ pg. 57)	UP Button (☞ pg. 56)
EFFECT ON/OFF	Operation Buttons
Button (☞ pg. 57)
	(☞ pg. 56, 66)
CANCEL Button (☞ pg. 61) R.A. EDIT Buttons (☞ pg. 60)

Installing The Battery

The RM-V708U or RM-V710U uses one lithium battery (CR2025).

1 PULL OUT BATTERY HOLDER Pull out in the direction of the arrow while pressing the knob as shown.

2 INSERT BATTERY IN HOLDER Insert the battery in the holder, and be sure to have the “+” mark visible.

3 RE-INSERT HOLDER

Slide the holder back in until you hear a click.

Knob