JVC LYT0002-088B manual This may occur when

EN 71

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

30.The indicators and the image colour on the LCD monitor are not clear.

30. •This may occur when the	30.
surface or the edge of the	————
LCD monitor is pressed.

31. Images on the LCD	31. •The speaker volume is too	31. •Turn the speaker volume
monitor are jittery.	great.	down (☞ pg. 73).
32. The LCD monitor and the	32.	32. •Wipe them gently with soft
lens have become dirty	————	cloth. Wiping strongly can
(ex. fingerprints).		cause damage.
33. The LCD monitor	33. •Certain FADE/WIPE, P.AE/	33. •Re-read the sections
indications blink.	Effects and other functions	covering FADE/WIPE and
	that cannot be used	P.AE/Effects
	togetherare selected at the	(☞ pgs. 34 – 42).
	same time.
34. Coloured bright spots	34. •The LCD monitor is made	34.
appear all over the LCD	with high-precision
monitor.	technology. However, black
	spots or bright spots of light
	(red, green or blue) may
	appear constantly on the	————
	LCD monitor. These spots
	are not recorded on the
	tape. This is not due to any
	defect of the unit. (Effective
	dots: more than 99.99 %)
35. The LCD monitor	35. •During playback of the	35.
indications are distorted.	unrecorded portion, High-
	speed Search and still	————
	playback, LCD monitor
	indications appear distorted.
	This is not a defect.
36. An unusual mark appears	36.	36. •Check the section of the
in the LCD monitor.	————	manual that explains
		LCD monitor indications
		(☞ pgs. 74, 75).
37. An error indication	37. •A malfunction of some kind	37. •Remove the tape or the
(E01 — E07) appears in	has occurred. In this case	battery pack, and wait a
the LCD monitor.	the camcorder’s functions	few minutes for the
	become unusable.	indication to clear. When it
		does, you can resume using
		the camcorder.
		If the indication remains,
		please consult your nearest
		JVC dealer or Technical
		Service Center.
38. The charge indicator on	38. •The temperature of the	38. •To protect the battery, it is
the AC Power Adapter/	battery is extremely high/	recommended to charge it
Charger does not light.	low.	in places with a tempera-
	•Charging is difficult in	ture of 10°C to 30°C
	places subject to extremely	(☞ pg. 9).

high/low temperatures.

39.The recording mode indicator "LP" blinks on the LCD monitor.

39. •This occurs when recording in	39.
the LP mode is not available.
After the indicator blinks, the	————
recording mode switches to
"SP" and recording goes on.