JVC LYT0002-088B manual VCR/TV Connection, Start Playback, Recording deck

Set the TV to the channel or mode appropriate for video playback.

2 TURN ON POWER

Turn the Power Dial to "PLAY" and turn on the TV/VCR.

3

1 CONNECTVCR CAMCORDER TO TV OR Connect as shown in the illustration.

• It is recommended to place the camcorder on the CAM stand for playback (☞ pg. 10).

If Using A VCR . . . go to step 4. If not . . . go to step 5.

SELECT TV’S VIDEO MODE

CAM stand

50EN

PLAYBACK Basic Connections

VCR/TV Connection

Lens Core filter

To AUDIO OUT

A

U

DIO

IDEO

V

To VIDEO OUT

AUDIO and VIDEO cables (ø3.5, DVM1 to TV or VCR)

VIDEO OUT select switch (Y/C or CVBS)

To VIDEO IN connector

To TV or VCR

VCR

(Recording deck)

To AUDIO IN connectors	Cable adapter
	(provided)

4 CONNECTINPUT VCR OUTPUT TO TV Refer to your VCR’s instruction manual.

5 START PLAYBACK

Press 46. You can watch the scenes you recorded on the TV.

6 END PLAYBACK

Press 5 and, if you’re not going to continue using the camcorder, set the Power Dial to “OFF”.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 54).

•Playback Sound Mode Display

.... set the Power Dial to “REC”, and set “ON

SCREEN” in the Date/Time Menu (☞ pg. 12) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

NOTES:

●When using the provided VIDEO cable

(ø 3.5, DVM1 to TV or VCR) or AUDIO cable (ø 3.5, DVM1 to TV or VCR), make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.

●Before opening the cassette cover, disconnect the headphones and AUDIO/VIDEO connectors from the jacks because the cassette cover will interfere with them.

●For camcorders sold in the U.K., set the VIDEO OUT select switch of the Cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-VIDEO cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.