JVC LYT0002-088B manual Scene, Press the PUSH-OPENswitch and open the LCD monitor fully

28EN

RECORDING

Advanced Features (Cont.)

Scene

Record a vacation or an important event in 5-second clips to keep the action moving. The 5-Second function may also be activated during Full Auto operation. While the 5-Second mode is activated, Fade/ Wipe (☞ pg. 34), P.AE/Effects (☞ pg. 40) and other manual operations cannot be performed.

Lock button

LCD monitor

S 5

C	OFF
R			P
E
		L
		YA

Power Dial

PUSH-OPEN

Dissolves during 5 second mode recording

Select “5SD” at the System Menu (☞ pg. 32). “5SD MODE” appears in the LCD monitor in step 2 below. Record one 5-second clip, and the image at the end of the clip is stored. If you record the next clip within 5 minutes, the previous scene dissolves as the new scene appears.

* If you turn the power off, the stored image will be lost.

RECORDING START/STOP button

LCD monitor

REC

5 S MODE

After 5 sec.

PAUSE

5 S MODE

Record/Standby

1 OPEN LCD MONITOR

Press the PUSH-OPENswitch and open the LCD monitor fully.

2 SELECT MODE

Press the lock button located on the Power Dial and turn the Power Dial to "5S". Then press RECORDING START/STOP. “5S MODE” appears in the LCD monitor, the tally lamp lights to indicate the start of recording, and after 5 seconds the camcorder enters Record/ Standby mode.

•If you press and hold RECORDING START/ STOP within 5 seconds after recording starts, Record/Standby mode is not engaged.

3 END 5-SECOND MODE RECORDING Set the Power Dial to the “REC” or “OFF” position.

To Take A Snapshot In The 5-Second Mode . . .

..... instead of pressing RECORDING START/STOP

in step 2, press SNAPSHOT. The camcorder records a 6-second still with the shutter sound. (☞ pg. 26).