JVC LYT0002-088B manual EN TR Ouble Shooting, Effect pg

68EN TROUBLESHOOTING (Cont.)

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

10.Even though “GAIN UP” was set to “A”, scenes shot in dark places are not brightened.

10. •Depending on the light source, 10.

the 1/30 shutter speed may be	————
deactivated in order to reduce
the shakiness in the picture.

11. Snapshot mode cannot be	11. •P.AE/Effects Sepia,	11. • Disengage them (☞ pg. 40).
used.	Monotone or Slow (Slow	• Disengage the Squeeze
	Shutter) are activated.	mode (☞ pg. 31).
	•The Squeeze mode is
	selected.
12. Although the SNAPSHOT	12. •"PHOTO FRAME" is set to	12. • Set "PHOTO FRAME" to
button is pressed, the	"OFF" in the system menu.	"ON" in the system menu
white border does not	•The Cinema mode is engaged,	(☞ pg. 32).
appear.	disabling the white border.	• Disengage the Cinema
		mode (☞ pg. 31).
13. Digital Zoom doesn’t	13. •10X optical zoom is selected.	13. • Turn off the Video Echo
work.	•The Video Echo effect is activated.	effect (☞ pg. 41).
	•Picture Wipe or Dissolve	• Wait until the Picture Wipe
	are being used in a scene	or Dissolve effects are
	transition.	completed (☞ pg. 36).
	•5-Second recording was	• Change the setting of either
	done with the Power Dial	the System Menu or the
	set to “5S”, and with “5SD”	Power Dial (☞ pg. 32).
	selected in the System Menu.	• Do not attempt to take a
	•Snapshot Dissolve was	Snapshot when performing
	attempted during Digital	Digital Zoom (☞ pg. 26).
	Zoom.
14. P.AE/Effects and Fade/	14. •The shooting mode selector	14. • Set the shooting mode
Wipe Effects don’t work.	is set to “AUTO”.	selector to “MANUAL”
	•The Power Dial is set to	(☞ pg. 18).
	“5S”.	• Change the setting of the
		Power Dial.
15. The Black & White Fader	15. •The Sepia or Monotone	15. • Turn off Sepia and
doesn’t work.	effects are activated.	Monotone (☞ pg. 40).
16. The Dissolve function	16. •P.AE/Effects Sepia,	16. • Turn off Sepia and
doesn’t work.	Monotone or Slow are	Monotone before adding
	activated.	Dissolve to a scene
	•The Squeeze mode is	transition (☞ pg. 40).
	selected.	• Make sure that the Squeeze
		mode in the Recording

Menu is set to “OFF” (☞ pg. 31).

17.Scene transition does not go as expected.

17. •When using "Picture Wipe/	17.
Dissolve" (☞ pg. 36) or
"Dissolves during 5 second
mode recording" (☞ pg. 28),
there is a delay of a fraction
of a second between the
previous record stop-point	————
and the Dissolve start-point.

This is normal, but this slight delay becomes especially noticeable when shooting fast-moving subject or during rapid panning.