SECTION IV - INSTALLATION INSTRUCTIONS

A.PACKAGED BOILER

1.The packaged boiler comes on its own shipping skid (see Figure 48) and the assembled block is hydrostatically tested at the factory. Once the boiler is in its final position, perform another hydrostATIC TEST AT 1½ times the working pressure of the boiler (see Section II, Paragraph C). The shipping skid can be used as a housekeeping pad unless local codes say otherwise. Most controls are pre-wired down to the burner. If burner is equipped with a lead lag panel, lead lag controls will be shipped loose for header mounting. The power can be supplied to the burner if equipped with a control panel. If burner has no panel, the power must be supplied to a junction box near the front of the boiler.

2.If the boiler burner unit was factory fire tested, the burner was adjusted to approximately 10.2%

CO2 (gas) or 13.2% CO2 (oil) with an overfire pressure as listed in Table II of this manual. Final adjustments should be made once the unit is installed.

B.BOILER PIPING - HEATING APPLICATIONS

CONNECT SUPPLY AND RETURN PIPING TO HEATING SYSTEM (see Figures 49a, 49b, 50a and 50b).

WARNING

Failure to properly pipe boiler may result in improper, unsafe system operation and void manufacturer’s warranty.

DO NOT improperly pipe boiler.

WARNING

All hot water pipes must have clearances of at least 1/2” from all combustible construction.

WARNING

A hot water boiler installed above radiation level must be provided with a low water cutoff device as part of the installation.

1.HOT WATER HEATING - This boiler must be installed in strict accordance to the instructions found in this installation manual. Deviations from these installation instructions may void manufacturer’s warranty.

Packaged Boiler Shipping Information

 

Length

Width

Height

Approx.

Approx.

Number of

Center of

Shipping

Sections

A

B *

C

Gravity D

Weight

(Inch)

(Inch)

(Inch)

 

** (Inch)

(Lbs.)

 

 

 

 

4

77½

48

61½

23¼

2789

5

83½

48

61½

26¼

3272

6

95½

48

61½

29¼

3755

7

101¾

48

61½

32½

4249

8

108

48

61½

35½

4783

9

114

48

61½

38½

5261

10

130¼

48

61½

44½

5757

11

136½

48

61½

47¾

6236

12

142½

48

61½

50¾

6739

13

148½

48½

61½

53¾

7227

14

154¾

48½

63½

57

7760

15

161

48½

63½

60

8335

16

167

48½

63½

63

8824

17

173

48½

63½

66

9324

18

179¼

48½

63½

69¼

9823

* Width can vary with gas train configuration.

** Varies slightly with burner and gas train configuration.

1. Do not tilt. Exercise caution when lifting to avoid damage.

2.This boiler can be lifted by fork truck. Do not truck from

front.

3.When lifting from rear, forks must extend from beyond center of gravity and second skid cross bar.

4.When lifting from side, forks must extend to opposite skid rail and straddle center of gravity.

5. Cablespreader is to prevent jacket damage. Spreader width should equal B (width of skid) + 12”. Adjust cable lengths to lift at approximate center of gravity per chart.

Figure 48: Packaged Boiler Shipping Information

58

Page 58
Image 58
Burnham FM01FD00B manual Section IV Installation Instructions, Packaged Boiler Shipping Information

FM01FD00B specifications

The Burnham FM01FD00B is a remarkable heating solution that combines efficiency, reliability, and advanced technology to meet the demands of modern homes and commercial spaces. Standing out in the crowded market of heating systems, the FM01FD00B is designed for those who prioritize both performance and energy savings.

One of the most significant features of the Burnham FM01FD00B is its advanced combustion technology. The system utilizes a high-efficiency burner that maximizes fuel usage, resulting in lower operating costs and reduced environmental impact. The unit is engineered to provide consistent heat distribution, ensuring that every corner of a room reaches a comfortable temperature quickly and effectively.

In addition to its efficient burning capabilities, the FM01FD00B is compatible with multiple heating mediums, allowing it to adapt to various fuel types, including natural gas and propane. This versatility makes it an excellent choice for homeowners looking for flexible heating options that can cater to their specific needs.

The FM01FD00B also comes equipped with a state-of-the-art control system that offers precise temperature management. Users can easily program their desired heating schedule, ensuring optimal comfort at all times. The intuitive interface allows for easy adjustments, making it simple to maintain a cozy environment whether at home or away.

Another key characteristic is the unit's robust construction. Built with high-quality materials, the Burnham FM01FD00B is designed to withstand harsh conditions and provide lasting performance. The durable exterior is resistant to corrosion, further enhancing its longevity and reliability.

Moreover, the system features built-in safety mechanisms that protect against overheating and other potential hazards, ensuring peace of mind for users. This focus on safety extends to its low emissions, making it an eco-friendly choice for those looking to reduce their carbon footprint.

In conclusion, the Burnham FM01FD00B is a high-efficiency heating solution that excels in performance, adaptability, and safety. Its advanced technologies, robust construction, and user-friendly features make it an ideal choice for anyone seeking a dependable and efficient heating system for their home or business. Whether you prioritize energy savings, reliability, or comfort, the FM01FD00B stands out as a top contender in the heating market.