60 EN
VIDEO/MEMORY |
Switch |
| MENU Button |
SET/SELCT | +, – Button |
Button |
Play/Pause
Button (4/6)
Power Switch
Lock Button
SNAPSHOT Button
Display
VIDEO Menu
COPY – OF F
ON
SP | 6 |
DUBBING (cont.)
Dubbing Still Images Recorded On A Tape To A Memory Card
Still images can be dubbed from a tape to a memory card.
1
2 Select the Snapshot mode in the Menu Screen ( pg. 28) to use for dubbing the image to the memory card.
3 Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “ 
” while pressing down the Lock Button located on the switch.
4 Press MENU. The Menu Screen appears. Press + or – to select “ 
VIDEO” and press SET/SELECT. The
5
6 Press + or – to select “
RETURN” and press SET/ SELECT twice. The normal playback screen resumes.
7 To select a still image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.
8 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.
•“ 
” blinks during dubbing.
NOTES:
●If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.
●If an image recorded on the tape using the WIDE mode ( pg. 42) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
●To use Playback Special Effects with a video image you wish to dub, perform up to step 8 using the remote control (provided) ( pg. 65).
●Images are dubbed in VGA file size.
