58 EN
| To AV OUT |
To | Docking Station |
OUT |
|
DUBBING
Dubbing To A VCR
1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 24 and 25.
2 Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the camcorder’s Power Switch to “ 
” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3 Engage the VCR’s AUX and Record-Pause modes.
To
Audio/Video cable
To AUDIO,
VIDEO* IN
VCR
TV |
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6 on the camcorder and engage the VCR’s Record mode.
6 Engage the VCR’s
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. 11).
●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.
●Before you start dubbing, make sure that the indica- tions do not appear on the connected TV. If they do, they are being recorded onto the new tape.
*Connect when an
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in
the Menu Screen ( pg. 44, 45).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 44, 45).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 44, 45). Or, press DISPLAY
on the remote control.
●You can use Playback Zoom ( pg. 64) or Playback Special Effects ( pg. 65) in step 5.
