JVC LYT0844-001A Using USB cable, Using DV cable, Never disconnect the USB cable while

74 EN	SYSTEM CONNECTIONS
[A] Using USB cable
	USB cable	To USB
To USB	(optional)	connector
		PC
Docking Station	OR
[B] Using DV cable
	DV cable	To DV
To DV IN/OUT	(optional)	connector
	Core filter	Core filter
Open the connector cover.		PC with DV connector

Connection To A Personal Computer

[A] Using USB cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

2If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

•Only the still images stored in the memory card can be transferred to a PC.

3Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (
pg. 11).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

“USB MODE” and/or “ACCESSING FILE” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILE” is displayed on the LCD monitor since this can result in product damage.