JVC LYT0844-001A Video Playback, Normal Playback, EN23, To Control The Speaker Volume

VIDEO PLAYBACK

VOL. +/–

VIDEO/MEMORY

Switch

Play/Pause

Button (4/6)

Power Switch

	Lock Button
Speaker
Stop Button (5)	SHUTTLE SEARCH
	Ring (2/3)

EN23

Normal Playback

1Load a tape (
pg. 14).

2Set the VIDEO/MEMORY Switch to “VIDEO”, then

set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Turn the SHUTTLE SEARCH Ring anti-clockwise (2) and release to rewind, or clockwise (3) and release to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

.... press VOL. + to turn up the volume, or – to turn

down the volume.

NOTES:

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn

on again, set the Power Switch to “OFF”, then to “ ”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (
pg. 24, 25).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Shuttle Search: Allows high-speed search in either direction.

1)During playback, turn the SHUTTLE SEARCH Ring clockwise (3) and release for forward or anti- clockwise (2) and release for reverse search.

2)To resume normal playback, press 4/6.

●During playback, turn the SHUTTLE SEARCH Ring clockwise (3) or anti-clockwise (2) and hold it. The search continues as long as you hold the ring. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and Playback Special Effects

Available only with the remote control (provided) (
pg. 64, 65).