JVC LYT1147-001A 50 EN, To use this camcorder as a player, To use this camcorder as a recorder

50 EN DUBBING

Dubbing To Or From A VCR

.

Connector
Cover**	To S/AV connector

S/AV/Editing cable

To S-VIDEO IN* or (provided) OUT*

To AUDIO IN or OUT,

VIDEO IN or OUT

Not connected

VCR

TV

*Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable.

**When connecting the cable, open the cover.

To use this camcorder as a player...

1Following the illustrations, connect the camcorder and the VCR. Also refer to page 22.

2Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”.

3Set the camcorder’s Power Switch to “P” while pressing down the Lock Button located on the switch.

4Turn on the VCR’s power.

5Insert the source cassette in the camcorder.

6Insert the recording cassette in the VCR.

7Engage the VCR’s AUX and Record-Pause modes. ● Refer to the instruction manual for the VCR.

8Press 4/9 on the camcorder to start playback of the source tape.

9At the point you want to start dubbing, engage the VCR’s Record mode.

10To pause dubbing, engage the VCR’s Record- Pause mode and press 4/9 on the camcorder.

11Repeat steps 8 – 10 for additional editing. Stop the VCR and camcorder.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. ( pg. 11)

●As the camcorder starts to play your footage, it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV...

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 31, 41) Or, press DISPLAY on the remote control to turn on/off the date indication.

•Time code

Set “TIME CODE” to “OFF” or “ON”. ( pg. 31, 41)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 31, 41)

To use this camcorder as a recorder...

1)Perform steps 1 to 3 in the left column.

2)Set “S/AV INPUT” to “A/V.IN” or “S.IN”*. ( pg. 31, 40)

*Select “S.IN” when using S-VIDEO OUT connector on your TV/VCR.

3)Set “REC MODE” to “SP” or “LP”. ( pg. 31, 34)

4)Insert the recording cassette in this camcorder.

5)Press START/STOP on the remote control to engage the Record-Pause mode. The “ A/V.IN ” or “ S.IN ” indication appears on the screen.

6)Press START/STOP on the remote control to start

recording. The indication rotates.

7)Press START/STOP on the remote control again to

stop recording. The indication stops rotating.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.