JVC LYT1325-001A manual Date/Time Settings, Grip Adjustment, Viewfinder Adjustment

14 EN GETTING STARTED

Date/Time Settings

The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback.

(☞ pg. 29, 33)

1 Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2 Open the LCD monitor fully. (☞ pg. 17)
3 Press MENU. The Menu Screen appears.
4 Press r or t to select “n”,
	CAMERA DISPLAY
and press SET. The CAMERA	BR I GHT
	ON SCREEN – LCD / TV
DISPLAY Menu appears.	DATE / T I ME – AUTO
	T I ME CODE – OFF
	AUX M I C	– ON
5 Press r or t to select “CLOCK
	ADJ .	1 7 : 3 0
	CLOCK	2 0 . 1 2 . 0 4
ADJ.”, and press SET. The
parameter for “Day” is highlighted.	RETURN
6 Press r or t to input the day,
	CAMERA DISPLAY
and press SET. Repeat to input the
month, year, hour and minute.	CLOCK			. 1 2 . 0 4
			2 0
	ADJ .			1 7 : 3 0
7 Press r or t to select

“BRETURN”, and press SET twice. The Menu Screen closes.

Grip Adjustment

1 Adjust the velcro strip.

2 Pass your right hand through the loop and grasp the grip.

3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button and Power Zoom Lever. Be sure to fasten the velcro strip to your preference.

Viewfinder Adjustment

1 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.

3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.

Example: Dioptre Adjustment Control

PAUSE

CAUTION:

When retracting the viewfinder, take care not to pinch your fingers.