VIDEO PLAYBACK
VIDEO RECORDING & PLAYBACK
EN 21
MasterPage: Video_Right
To choose whether or not the following displays
appear on the connected TV
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (墌pg. 29, 33)
Or, press DISPLAY on the remote control to turn on/off the
date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF”. (墌pg. 29, 33)
●Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(墌pg. 29, 33)
NOTES:
●It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (墌pg.13)
●To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorder’s Power Switch to “A” or “M”, then set your TV
to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum
level to avoid a sudden burst of sound when the camcorder
is turned on.
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (墌pg.22)
Installing The Battery
The remote control uses one
lithium battery (CR2025).
1Pull out the battery holder
by pushing the lock tab.
2Insert the battery in the
holder, and be sure to have the
“+” mark visible.
3Slide the holder back in until
you hear a click.
Beam Effective Area (indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance for
indoor use is 5 m.
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor is directly exposed to
sunlight or powerful lighting.
Buttons And Functions
AInfrared beam transmitting window
●Transmits the beam signal.
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
BPAUSE Button
●Pauses the tape (墌pg.22)
Up Button (墌pg. 22)
CSLOW Rewind Button (墌pg.22)
DREW Button
●Rewind/Reverse Shuttle Search on a tape (墌pg.20)
●Displays previous file in a memory card (墌pg.24)
Left Button (墌pg.22)
EINSERT Button (墌pg.43)
FSHIFT Button (墌pg. 22, 44)
GDISPLAY Button (墌pg.21, 40, 45 )
HSLOW Forward Button (墌pg. 22)
IPLAY Button
●Starts Playback of a tape (墌pg. 19)
●Starts Auto Playback of images in a memory card
(墌pg. 24)
JFF Button
●Forward/Forward Shuttle Search on a tape (墌pg.20)
●Displays next file in a memory card (墌pg.24)
Right Button (墌pg. 22)
KA. DUB Button (墌pg. 43)
LSTOP Button
●Stops the tape (墌pg.19)
●Stops Auto Playback (墌pg. 24)
Down Button (墌pg. 22)
MEFFECT Button (墌pg. 22)
NEFFECT ON/OFF Button (墌pg. 22)
The following buttons are available when the camcorder’s
Power Switch is set to “A” or “M”.
oZoom (T/W) Buttons
Zoom in/out (墌pg. 18, 22)
(Also available with the Power Switch set to “PLAY”)
pSTART/STOP Button
Functions the same as the Recording Start/Stop
Button on the camcorder.
qS.SHOT Button
Functions the same as SNAPSHOT on the camcorder.
(Also available with the Power Switch set to “PLAY”)
Playback Using The Remote Control
1
1
2
3
Lock tab
Remote sensor
GR-DZ7PAL_05Video.fm Page 21 Monday, July 5, 2004 6:47 PM