JVC LYT1325-001A manual Set Remote/VCR Code, Buttons And Functions RM-V717U

44 EN EDITING

Random Assemble Editing [R.A.Edit]		VCR CODE LIST
		BRAND NAME	CODE
Create edited videos easily using your camcorder as the		AKAI	62, 64, 77
source player. You can select up to 8 “cuts” for automatic
		BLAUPUNKT	13
editing, in any order you like. R.A.Edit is more easily
performed when the MBR (Multi-Brand Remote) is set to		DAEWOO	18
operate with your brand of VCR (see “VCR CODE		FERGUSON	97, 98, 32
LIST”), but can also be performed by operating the VCR
		GRUNDIG	14, 34
manually.
		HITACHI	66, 63
● Use the optional remote control kit RM-V717KITU. It is a
set composed of RM-V717U remote control, an Editing		JVC A	91
cable* and an Editing extension cable.
		JVC B	96
* The Editing cable is not required with this camcorder.		JVC C	93
● Refer to remote control kit’s instructions as well.		LG/GOLDSTAR	11
Set Remote/VCR Code		MITSUBISHI	67, 68
1 Turn off the power to the		NEC	37, 38
	SHIFT MBR SET	PANASONIC	13, 17, 11, 94, 18
VCR and point the remote
		PHILIPS	19, 95, 11, 94, 91, 96, 12, 33, 72
towards the VCR’s infrared
sensor. Then, referring to the		SAMSUNG	94
VCR CODE LIST, press and		SANYO	36, 35
hold MBR SET, and enter the
		SELECO, REX	91, 96
brand code.
		SHARP	15, 10
The code is automatically set
once you release MBR SET,		SONY	65, 60, 39, 31
and the VCR’s power comes		THOMSON,	91, 96, 97, 32
on.
		TELEFUNKEN, SABA,
2 Make sure the VCR’s power
		NORDMENDE
is on. Then, while holding		TOSHIBA	69, 61
SHIFT, press the button on the	RM-V717U (optional)
remote for the desired function.		Buttons And Functions (RM-V717U)
The functions the remote can
control are PLAY (U), STOP (8), PAUSE (9), FF (5),		A Infrared beam transmitting window
REW (3) and VCR REC STBY (79; you do not need		Transmits the beam signal.
to press SHIFT for this one).		B DISPLAY Button*
You are now ready to try Random Assemble Editing.		C SHIFT Button (see the left column)
IMPORTANT:		D SLOW Rewind/Forward Buttons*
		Left/Right Buttons*
Although the MBR is compatible with JVC VCRs and those of
		E REW Button*
many other makers, it may not work with yours or may offer		F FADE/WIPE Button ( pg. 46)
limited functions.
		G EFFECT ON/OFF Button*
NOTES:
		H EFFECT Button*
● If the VCR’s power does not come on in step 1, try another		I PAUSE IN Connector ( pg. 45)
code from the VCR CODE LIST.		J MBR SET Button (see the left column)
● Some brands of VCR do not come on automatically. In this
case, turn the power on manually and try step 2.		K Up Button*
		INSERT Button*
● If the remote control is not able to control the VCR, use the
		L Down Button*
controls on the VCR.
● When the remote control’s batteries run out, the VCR brand		A. DUB Button*
you have set will be erased. In that case, replace the old		M PLAY Button*
battery with a new one to reset the VCR brand.		N FF Button*
		O STOP Button*
		P PAUSE Button*
		Q R.A.EDIT Buttons
		( pg. 46, 47)
		a Zoom (T/W) Buttons*
		b START/STOP Button*
		c SNAPSHOT Button*

*Functions the same as each corresponding button on the provided remote control RM-V720U (
pg. 21)