42 EN EDITING

 

Connection To A Personal Computer

[A] Using USB cable

 

 

 

 

It is possible to do the following things:

 

 

 

 

 

 

 

 

[A] Using USB cable

[B] Using DV cable

Transfer still images stored on a memory card to a PC.

Transfer still/moving images recorded on a tape to a

 

 

 

 

PC.

OR

[B] Using DV cable

It is possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software. It is also possible to use this camcorder as a WebCam. (Windows XP only)

NOTES:

To USB

 

To DV IN/OUT

 

 

Core filter

USB cable

 

DV cable

(provided)

 

 

(optional)

 

 

 

 

Core filter

 

To USB

To DV

PC

connector

connector

 

PC with DV

 

connector

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

Connect the DV cable first to the PC, and then to the camcorder.

Connect the DV cable (plugs) correctly according to the shape of the DV connector.

Refer to “SOFTWARE INSTALLATION AND PC CONNECTION GUIDE” for the installation of the bundled software and drivers.

The software operation manual is provided as PDF file on the CD-ROM.

It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)

Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

The date/time information cannot be captured into the PC.

Refer to the instruction manuals of the PC and Software.

The still images can also be transferred to a PC with a DV connector-equipped capture board.

The system may not work properly depending on the PC or capture board you are using.

“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.

Page 42
Image 42
JVC LYT1325-001A manual Connection To a Personal Computer Using USB cable, Using USB cable Using DV cable