32 EN MENUS FOR DETAILED ADJUSTMENT

TIME CODE

 

 

 

Playback Menus

[OFF]: Time code is not displayed.

 

ON: Time code is displayed on the camcorder and on the

 

 

VIDEO

connected TV. Frame numbers are not displayed during

 

 

 

[ ] = Factory-preset

recording. ( pg. 19)

 

 

 

SOUND MODE and NARRATION

AUX MIC

 

 

 

 

During tape playback, the camcorder detects the sound

OFF: Auxiliary microphone level indicator does not

mode in which the recording was made, and plays the

appear.

sound back. Select the type of sound to accompany your

[ON]: Displays auxiliary microphone level indicator when

playback picture. According to the menu access

optional microphone is connected. ( pg. 8)

explanation on page 29, select “SOUND MODE” or

 

 

 

 

 

 

“NARRATION” from the Menu Screen and set it to the

CLOCK ADJ.

 

 

 

 

desired parameter.

 pg. 14, “Date/Time Settings

 

 

 

DSC

[ ] = Factory-preset

QUALITY

SOUND MODE

[STEREO ]: Sound is output on both “L” and “R” channels in stereo.

SOUND L : Sound from the “L” channel is output.

SOUND R : Sound from the “R” channel is output.

[FINE] / STANDARD

The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available:

FINE ( ) and STANDARD ( ) (in order of quality).

NOTE:

The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used.

( pg. 23)

IMAGE SIZE

640 x 480 / 1024 x 768 / 1280 x 960 / [1600 x 1200] The Image Size mode can be selected to best match your needs. ( pg. 23)

NOTE:

The setting can be changed only when the VIDEO/MEMORY Switch is set to “MEMORY”.

REC SELECT

[ (TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.

/ (TAPE/CARD): When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in CAMERA Menu is also applicable to memory card recording.

INT.SHOT

[OFF]: Disables the function.

ON: Enables interval shooting. ( pg. 23)

INT.TIME

15SEC / 30SEC / [1MIN] / 2MIN / 5MIN / 10MIN / 30MIN / 60MIN Allows you to select the shooting interval for interval shooting. ( pg. 23)

NARRATION

[OFF]: Original sound is output on both “L” and “R” channels in stereo.

ON: Dubbed sound is output on both “L” and “R” channels in stereo. ( pg. 43)

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.

SYNCHRO

pg. 47, “For More Accurate Editing”

REC MODE

[SP] / LP

Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use “REC MODE” in VIDEO Menu when using this camcorder as a recorder during dubbing. ( pg. 40, 41)

COPY

[OFF]: When the SNAPSHOT button is pressed during tape playback, the playback image pauses and normal playback will resume after approximately 6 seconds.

(The still image is not recorded.)

ON: Enables dubbing of images recorded on a tape to a memory card. ( pg. 26)

NAVI.DEL.

IMAGE SEL. / TAPE SEL. / ALL / RETURN

pg. 39, “To delete thumbnail images”

BLANK SRCH

pg. 20, “Blank Search”

S/AV INPUT

[OFF]: Disables audio/video signal input from the S/AV connector. ( pg. 40)

A/V.IN: Enables audio/video signal input from the S/AV connector. ( pg. 40)

S.IN: Enables audio/S-video signal input from the S/AV connector. ( pg. 40)

Page 32
Image 32
JVC LYT1325-001A manual Playback Menus, Sound Mode and Narration