JVC PC Connection Kit manual 32

32		EN		TROUBLESHOOTNG		(cont.)
	Problem		Cause			Page
	Automatic capture does not		• This function may not operate correctly		6, 9, 11,14
	function correctly.		sometimes depending on your PC’s
			specifications and operating environment.
			• This may occur if you move theDV
			Controller window, operate its scroll bars or
			perform a file operation while capturing
			images.
			• This may occur if correct data is not being
			transmitted due to damage on the videotape.
			• This may occur if a tape recorded in the LP
			mode is played back on a different video
			source unit. Play videotapes using the video
			source unit they were recorded on.
			• There may be software running in the
			background. Confirm that there are no
			programs running in the background that
			may be using the processor at the same time
			as JLIP Video Capture.

NOTE

When using a laptop PC, operation may be interrupted by a warning when the battery is nearly exhausted.

•If there is software which monitors the status of the battery running in the StartUp folder...

Close the application, or delete/move its icon from the StartUp folder and reboot your PC.

•If you are using your PC’s power management function...

Click the right button to select My Computer, then select Properties —

System Properties — Device Manager — System Devices — Advanced Power Manage- ment Support. Follow the appropriate procedure below.

For Windows® 95, click Settings and deselect Enable power management support (the check mark (u) next to it disappears).

For Windows® 98, select Disable in this hardware profile (a check mark (u) appears next to it).