1P.AE/Effect buttons

•Selects one of the 5 P.AE/Effects available per programmed scene.

•To cancel the selected effect, click the EC (Effect Clear) button.

2Fade/Wipe Effect buttons

•Selects one of the 7 Picture Wipes or 10 Fades/Wipes available per scene transition.

•To cancel the selected effect, click the TC (Transition Clear) button.

3Elapsed Time

•Displays the total elapsed time of all the programmed scenes.

4Button for Opening the Controller Window

•Displays the controller.

•Can be displayed even when selecting the menu Window — Controller.

5Program list

•Displays the following setting information beginning from the left: Scene number, In point, P.AE/Effect, Out point, Fade/Wipe Effect, Duration Time Counter, and Memo.

•Up to 99 programs can be set per file for scenes specified by an In and Out point.

6ID number

•Displays the video source unit’s ID number.

•An ID number can be clicked to display the JLIP Devices dialog box as well as when switching the serial port or performing JLIP devices scanning.

7Edit Indicator

•In Normal mode, the deck being operated is displayed in green.

•In Edit mode, both deck indicators light (Player: Green, Recorder: Red) and an arrow also lights.

•The recorder lights red between the In point and Out point while the recorder is actually recording.

•Clicking on either deck selects the one to be operated.

EN 37

8Tape counter display

•Displays the current tape position.

ex.

00: 01: 45: 10 (Hours : Minutes : Seconds : Frames)

•The digital camera’s counter uses a drop-frame system.

9Close button

•Close the controller window.

0Edit buttons

A B C

A. Edit Standby button

•The player is put into Pause mode for the Syncro Edit pre-roll time already set on the Options dialog box (see

page 52).

•This button is used when VCRs not compatible with this editing system and performing manual editing.

•This button cannot be clicked when the counter reads less than 00:00:30:00.

•This button cannot be clicked when the player is not paused.

B.Syncro Edit button

•After going into Playback-Pause mode at the In point of the recorder and player, clicking this button rewinds both decks by the pre-roll amount and executes the first event.

•Since no Out point is specified, the Syncro Edit is stopped using Stop.

•This button cannot be clicked when the counter reads less than 00:00:30:00.

•This button cannot be clicked when the player is not paused.

C.Select Player/Recorder button

•Selects the deck to be operated. The player is forcibly selected when no recorder is connected to the JLIP.

•This button cannot be clicked when there is no JLIP recording equipment.