BASIC OPERATIONS

Entry

EN 41

Operating the video source unit

1 Set the video source unit to the Play mode and insert a recorded tape.

2 Click ©.

•The playback picture appears on the TV monitor.

Setting in/out points

1 To set In/Out points, click Entry at the beginning and end of the scene you want to dub.

•Set In/Out points so that the Out point comes after the In point.

•If a scene has no Out point, program playback and dubbing will be disabled for that scene.

•If you set In point at the beginning of the tape or if you set Out point at the end of the tape, editing may not function properly. If this happens, change previously registered In/Out points slightly and try setting them again.

•The counters of digital video cameras cannot be reset.

•In points must have a counter value of 00:00:30:00 or later.

•Some values cannot be set due to drop- frame counters.