OPERATIONS WITH THE SETUP MENU
W.PAINT | GAIN SHUTTER IRIS MANU OPERATE |
ENTER
MENU FUNC1 FUNC2 /SET
B C D
● The setup menu can be accessed via the |
MENU button and displayed on the LCD panel. |
oCAMERA MODE (CAM/BARS/NEGA)
● Selects the camera’s video output.
1.Select A1: CAM MODEB using MENU button B. 1 : CAM MODE
CAM
Output mode indication
2.Select output mode, CAM (camera output), BARS (color bars signal) or NEGA (negative signal) using FUNC2 button D.
DEUTSCH ENGLISH
Setting items can be selected and set as |
required. |
FUNC2
Select output mode.
1.Press either MENU button B ( 
or 
) to select desired Menu item on the LCD.
2.Setting procedure varies for each item. To set data, follow the procedure for each item as described in the following sections.
●A
●Press MENU B to select the menu.
●After maximum menu item number, there are no further indications (nothing will be displayed on the LCD.
Menu No. | Display |
|
|
1 | 1: CAM MODE |
2 | 2: CONTOUR |
3 | 3: SC FINE COARSE |
4 | 4: H.PHASE |
5 | 5: GAMMA |
6 | 6: IRIS DETECT |
oCONTOUR MODE (ON/OFF), CONTOUR
LEVEL CONTROLS
●Set to ON to correct contour or to OFF when contour correction is not required. When set to ON, the contour correction level can be adjusted within a range of
1.Select A2: CONTOURB using MENU button B.
2 : CONTOUR OFF
Mode indication
2 : CONTOUR 
0 ON
Level
2.Set ON or OFF using FUNC2 button D.
ESPAÑOL ITALIANO FRANÇAIS
7 | 7: TITLE |
8 | 8: TITLE SET |
9 | 9: RANDOM TRIGGER |
10 | 10: |
| Press to advance to the next item. |
MENU |
|
To adjust contour level in the + direction.
To adjust contour level in the – direction.
Set ON or OFF.
FUNC1 FUNC2
Press to go back to the previous item. |
3.When set to ON, the current contour level is indicated and the contour level can be adjusted using FUNC1 button C.
●If the button is held depressed, the level will vary in 10 steps.
